Similar words: from strength to strength, on the strength of, strength, strengthen, strengthened, strengthener, strengthening, understrength. Meaning: n. the strength of material expressed as the greatest longitudinal stress it can bear without tearing apart.
Random good picture Not show
121. When aromatic content was more than 6%, the tensile strength of SBS decreased and SBS was easy to turn yellow.
122. The ultimate tensile strength(UTS) both in transverse and longitudinal of pipe body showed the trend for rising.
123. The texture evaluations of restructured meats are measured by texture profile analysis (TPA), expressible water percent, tensile strength and puncture test.
124. It is shown by comparison of properties of various conducting wires that Al cladding steel wire have good properties in respects of corrosion resistance, conductibility , tensile strength and etc.
125. Most metals have high tensile strength and high compressive strength.
126. For cold worked products, the tensile strength levels at temperature as specified in Table 17 apply.
127. RDH bleached pulp had relatively higher tear strength and lower tensile strength compared with traditional bleached sulfate pulp.
128. As the thickness of a steel plate increases, tensile strength decreases.
129. Because business card printing and membership card when paper toilet roll rotation to drag, high tensile strength can guarantee that the Web is not draggle .
130. Continuous basalt fiber have a lot of advantages including high-temperature resistant, incombustible, heat-insulation, good chemical stability, high tensile strength and high performance-price ratio.
131. The results showed that about 11% (weight fabrication) chopped fiber or 37% glass cloth reinforcing PTFE had the highest tensile strength and acceptable dielectric properties.
132. The results show that beam offset can greatly affect the macro performance of Laser tailor-welded weld , then affect the cupping Test value and tensile strength unconspicuous.
133. PU constructing joint sealant material with superior elongation and tensile strength.
134. The present investigation deals with the relationship of tensile strength with components structure, interfacial compatibility and blend composition.
135. Polymethyl methacrylate shows a good mechanical strength, tensile strength and hardness and is easy to polish.
136. The main technological properties are linear expansivity, tensile strength, flowability and solidification time.
137. The tensile strength and Young's modulus of CF/EP specimens before and after vacuum thermo-cycling were measured by an electrical universal material testing machine.
138. The results have shown that MCA can increase tensile strength and hardness of NBR and also improve the properties of resistance to heat aging and compression set of NBR as well.
139. The lower finish cooling temperature, the shorter interlamellar spacing in pearlite colonies and the higher tensile strength and ductility are.
140. It was observed that samples bleached in neutral region showed maximum copper number, mini-mum tensile strength, minimum degree of polymerization, and greatest potential damage.sentence dictionary
141. The silicone rubbers reinforced by MQ silicone resins had high transparency. The tensile strength of the silicone rubbers increased first and then decreased with increasing vinyl groups in MQ resin.
142. The tensile strength of composites was enhanced because of adding nano-inorganic particles into polylactide.
143. The tensile strength, elongation and hardness of T10 steel subjected to magnetic field quenching and to high temperature tempering were separately increased by 28%, by 8.
144. In addition to a variety of acupuncture blanket corresponding bulk aluminosilicate fiber cotton varieties of the same excellent performance, but also has an excellent tensile strength.
145. Principal mechanical properties of metallic fiber include tensile strength and stiffness.
146. Preparation tensile strength and impact strength was tested on tensile machine and impact testing machine. Using SEM rupture' s shape can be observed.
147. Films lateral tensile strength with the blow of blows ratio.
148. The effects of preforming duration, preforming pressure, extrusion die's geometry size and content of lubricant on the extrudate's tensile strength were studied.
149. The melt viscosity and tensile strength of lithium ionomer increased with the sulfonate content increasing.
150. In neutral, oxidizing atmosphere, the long-term use can still maintain good tensile strength, toughness and fiber structure.
More similar words: from strength to strength, on the strength of, strength, strengthen, strengthened, strengthener, strengthening, understrength, tower of strength, pillar of strength, flexural strength, a tower of strength, military strength, financial strength, tensile, pensile, utensil, prehensile, length, lengthen, lengthy, at length, lengthened, lengthways, lengthily, focal length, knee-length, lengthening, full-length, queue length.